On cyclohexane protection measures and environmental protection measures!

Today, cyclohexane manufacturers take you to understand the protective measures of cyclohexane and environmental protection measures!

I. Fire extinguishing agent:

Soluble foam, dry powder, carbon dioxide, sand. Avoid using straight water to extinguish the fire, which is easy to cause flammable liquid to escape and cause a larger area of accident, so that the fire spread.

Ii. Special Danger:

Flammable liquid and steam, combustion products for carbon monoxide, carbon dioxide. There is a risk of cracking and explosion when the pressure inside the container increases in the fire.

Iii. Precautions and Protective Measures for fire Fighting:

Firefighting personnel shall wear self-priming positive pressure breathing apparatus and full-body firefighting suit to fight fire upwind. Move containers from fire to open space if possible. Spray water to keep the container cool until the fire is over. Containers in the fire site must be evacuated immediately if they are discolored or produce sound from the safety relief device. Isolate the accident site and prevent irrelevant personnel from entering. Receiving and treating fire water to prevent environmental pollution.

Iv. Environmental Protection Measures:

Collect leakage, avoid environmental pollution, prevent leakage into the sewer, surface water, groundwater.

1, the storage and removal methods of leaking chemicals and the disposal materials used: small amount of leakage: adsorption or absorption with sand or other non-combustible materials, can also be washed with a lot of water, wash water diluted into the waste water system;

2. A large number of leaks: build embankments or dig pits. Cover with foam to reduce steam hazards, transfer to tank car or special collector with explosion-proof pump, recycle or transport to waste disposal site.